Stud M4X30

• M4: Metric thread with a 4 mm diameter.
• 30: Stud length of 30 mm.

How to Use

1. Prepare a Hole:

   • Ensure the hole is tapped with an M4 thread for secure fitting.

2. Insert the Stud:

   • Thread one end into the hole by hand or with a tool. Use thread-locking adhesive if needed.

3. Attach Components:

   • Place the component over the stud and secure with an M4 nut and washer for load distribution.

4. Tighten:

   • Tighten the nut with a wrench, avoiding over-tightening.